Ases Kahraba
    Ases KahrabaHomePricing & Calculators

    Burning Smell from a Socket in Tagamo3?

    This is a high-risk sign usually caused by overload or weak termination. Turn off the circuit immediately and inspect before re-energizing.

    What's the Real Cause?

    Overload on a single point from a power strip or adapter exceeding the socket's original rating
    Loose internal terminal screws in the socket raising resistance and generating heat under load
    An appliance with an internal fault (motor or resistor damage) drawing abnormal current and heating the point
    An aging socket or switch with degraded insulation no longer tolerating normal operating heat

    When Do You Need Immediate Action?

    Noticeable heat on socket/switch
    Dark marks or slight melting around the point
    Sparking during plug-in/unplug

    Don't Wait for the Fault to Get Worse

    Electrical faults get worse over time. Message us now and we'll arrange the nearest available slot.

    +20 100 411 1999

    Our Fix Process

    1Cut the circuit breaker immediately and visually inspect the socket before any contact
    2Inspect the connected appliance separately to confirm whether it or the socket is the heat source
    3Open the socket, inspect internal terminations, tighten any loose screw, or replace the socket entirely if needed
    4Full-load test on the point after repair to confirm the heating does not return

    FAQ

    What is the first action I should take?

    Turn off the related breaker immediately and stop using that outlet.

    Is the issue from the appliance or the socket?

    Could be both. We inspect appliance, outlet point, and wiring together.

    Is replacing the faceplate enough?

    Not always. Internal terminations and cable condition must be checked.

    Is there a real fire risk?

    Yes, if warning signs are ignored. Fast intervention is essential.

    Do you cover Tagamo3 and New Cairo?

    Yes, full coverage for Tagamo3 and New Cairo.

    Can I just clean the socket and reuse it?

    No — if there's internal melting or burning, the socket must be fully replaced. Cleaning alone is not a safe fix.

    What does replacing a burned socket or switch cost in Tagamo3?

    A single socket or switch replacement is low-cost, but if the cable itself needs the damaged section replaced, the price rises slightly.