Ases Kahraba
    Ases KahrabaHomePricing & Calculators

    Breaker Won't Reset After Tripping in Nasr City?

    If the breaker won't reset, it may be damaged or there's still a live fault in the circuit. Do not force it repeatedly — call us for safe diagnosis.

    What's the Real Cause?

    A short circuit still active in the circuit — a faulty appliance or touching wire prevents the breaker from holding
    Mechanical wear inside the breaker mechanism after years of repeated trip/reset cycles
    Sustained overload exceeding the breaker's ampere rating, tripping it the instant it's reset
    Worn internal contacts inside the breaker from repeated arcing on every trip

    When Do You Need Immediate Action?

    Breaker trips immediately every time you try to reset it
    Breaker won't move at all — stuck or broken handle
    Part of apartment has no power but panel appears normal

    Want to Confirm Your Wiring Is Safe?

    Message us on WhatsApp with photos or video of the issue, and we'll give you an initial diagnosis for free.

    +20 100 411 1999

    Our Fix Process

    1Disconnect all loads from the affected circuit and safely attempt a reset to isolate whether the fault is the circuit or the breaker itself
    2Insulation-resistance (Megger) test on the circuit to detect any hidden short or leakage inside the walls
    3Replace the faulty breaker with a new MCB at the same ampere rating if the breaker itself is confirmed damaged
    4Gradually re-energize the circuit while monitoring current to confirm the fix holds before we leave

    FAQ

    Why won't the breaker reset after tripping?

    Either the fault in the circuit hasn't been cleared (short or overload still present), or the breaker itself is damaged and needs replacement.

    Can I force the breaker back on?

    No. Forcing it risks fire or equipment damage. You need to know the cause first.

    How do I know if the breaker is faulty or there's a circuit fault?

    Disconnect all loads from that circuit, then try resetting. If it trips again immediately, the breaker is damaged. If it holds, there's a fault on the circuit.

    What does replacing an MCB breaker cost in Nasr City?

    A standard MCB replacement costs 80-250 EGP including installation, depending on rating and brand.

    Do you cover Nasr City?

    Yes, we cover all of Nasr City including Zone 10, Zone 17, and surrounding areas.

    Can the problem recur after replacing the breaker?

    No, if diagnosis was correct and the breaker was truly the cause. If the fault is in the circuit itself, that must also be repaired or it will recur.

    What does the diagnostic visit cost?

    Diagnosis is part of the visit itself; the final price depends on whether it needs just a breaker swap or deeper circuit repair.