Electrician Price Comparison Egypt 2026
Why do three electricians submit prices that vary threefold for the same job? The answer is not always greed or fraud — it reflects real factors in materials quality, experience, and warranty. This guide explains the numbers and helps you compare fairly.
By the Ases Kahraba team — Last updated: February 2026
Quick Answer
Day rate: 200–600 EGP. Per-point: 80–250 EGP. When does cheap mean dangerous? Full price breakdown + 4 red flags hiding in low quotes — read before you sign.
Price Ranges at a Glance (2026)
Prices in EGP. Labor only — materials quoted separately.
aseskahraba.comHow to Spot a Good Quote vs a Bad One
Quality signals
- ✓Specifies cable brand and cross-section
- ✓Names the distribution panel brand
- ✓Lists point count and circuit count
- ✓Offers a written workmanship warranty
- ✓Requests a site visit before quoting
Red flags
- ✗Verbal quote with no written breakdown
- ✗Price 40%+ below all other quotes
- ✗No mention of cable brand or grade
- ✗Demands full payment upfront
- ✗No mention of any warranty
aseskahraba.comElectrical Price Ranges in Egypt 2026 and Variation Factors
- Why prices vary threefold for the same job: cable quality, professional license, written warranty, geographic location (New Cairo vs governorates), and team size and experience — each factor independently affects the final price.
- Individual electrician day rate in Egypt 2026: ranges from EGP 800 to 2,000 per day depending on experience, specialization, and location. An electrician specializing in distribution panels commands a higher day rate than a general wiring electrician.
- Electrical company day rate (full team) in Egypt 2026: ranges from EGP 1,500 to 4,000 per day for the team including supervisor, workers, and tools. This price also covers insurance, warranty, and management costs.
- Price per electrical point (2 cables + flush box + accessory): ranges from EGP 200 to 600 per point in 2026. The difference results from accessory brand (local vs European), cable type, and cable run length.
- Full distribution panel replacement with circuit breakers: ranges from EGP 3,000 to 12,000 depending on panel size (8 circuits vs 24 circuits), breaker brand (Schneider / Legrand / local), and panel location difficulty.
- Full electrical rough-in and finishing for a 100 m² apartment: ranges from EGP 12,000 to 35,000. The gap between the low and high end reflects: cable quality, accessory brand, workmanship warranty, and whether civil works are included.
- How to evaluate quotes fairly: compare specifications before comparing prices. Ask each contractor to specify the cable brand and manufacturer, cross-section, distribution panel brand, and socket brand. A higher price with better materials and a written warranty may be better value long term.
Frequently Asked Questions
Should you always choose the lowest-priced quote?
No. The lowest-priced quote may be the most expensive long term if it uses inferior materials or omits essential items. The rule: compare specifications first, then compare prices among quotes with similar specifications. A difference justified by materials quality is acceptable — an unjustified difference is suspicious.
How do I verify that a day rate is reasonable?
Ask how many workers the day rate covers and who is included. A day rate of EGP 2,000 for a supervisor and two workers is better value than EGP 1,500 for a single worker. Calculate the expected total cost (day rate × working days) and compare it to the per-point price multiplied by the number of points.
Are electricians in New Cairo more expensive than in older Cairo districts?
Generally yes, due to higher living costs, travel expenses, and client expectations in newer areas. The difference can reach 20–30% for comparable services. However this does not mean a lower-priced electrician in a less expensive area cannot deliver good quality — specifications remain the benchmark.
What is the actual quality difference between local and European sockets?
European brand sockets (Legrand, Schneider, Bticino) offer higher-quality plastic, better heat resistance, and a longer operational life. The price difference between a local and European socket ranges from EGP 60 to 200 per unit. For a project with 50 points this represents a real budget difference.
Should I collect 3 quotes before choosing?
Yes, obtaining 3 quotes is best practice for projects above EGP 15,000. However, three quotes are only useful if they are based on the same specifications. A higher-priced quote with better specifications cannot be fairly compared to a cheaper quote with lower specifications.
How do I verify the electrician actually used genuine El-Sewedy cables?
Before walls are closed: ask to see the cable reels with their batch number (before pulling begins) — El-Sewedy prints the brand, cross-section, and batch number on the cable jacket. Weigh a 100m reel of 2.5mm² — it must weigh 13–14 kg. If it weighs less, the cable is either thinner than stated or uses impure copper. Keep photos of the reel numbers before final handover.